|
¡@
¡@ |
¡@
 Applied
all audiophile grade components, include DALE resistors, RA
resistors, EVOX and SOLEN caps,
custom order NOVER (UK brand) caps, all audiophile grade input &
output sockets
and gold IEC socket.
Sound Characteristics:
A bit smooth and musical but still has good detail and dynamic.
Product Features:
This product applies diamond differential circuit, which has been loved
by most Chinese and HongKong users. This circuit has always
been highly praised by users with its excellent
performance and musical of whole frequencies. Other circuits tend
to lose details and clarity when they get the musical flavor, this
product, however, retains rich details and high clarity with its
abundant music flavor. Diamond differential circuit has not only more
profusion of whole frequency harmonic, but also an extremely clear
sense of space and a correct delivery of speed.
SA-3000 without DC servo circuit , thus
it not only achieves the best performance on low frequency response and
control power, but also has no sensible influence on the tone quality.
But
difficult to building.
Each channels use 4 groups
stabilized voltage supplies with better
linearity are used in SA3000. A better power supply naturally guarantees
a better sound quality.
The use of Cascode deforming circuit brings the merits of
a good linearity and high-speed attribute.
A complete separation of left and right channels
naturally leads to a better resolution.
Overall, SA300 guarantees an extremely high SNR.
SA-3000
with remote control, the volume control applied resistors components,
can avoid channel imbalance and improve on sound quality than normal
potentiometer.
To get a better tone quality, valuable 2-ounce copper
foil high-strength double-sided holed board and all high grade
electronic parts are used in this product.
All aluminum classis box had used.The
balanced XLR input sockets of SA-300 are both expensive Neutrik
products. Other sockets include RCA socket of CMC, RA golden power
socket.
¡@
Specs
Weight:
15KG
Dimension:
435¡]W¡^*435¡]L¡^*85(H) MM
¡@
How to
choice the function in SA-3000 :
With the SA-3000, the user has a choice of 70 steps and 99
steps of volume control, and you can also choose whether to
have volume memory.
1. Choose 70/99 steps volume control:
Step A: Push on the "Debug" switch.
Step B: The display shows as below pix.
Step C: Turn the volume knob; choose display 70 or 99 on
right.
Step D: Push off the "Debug" switch.
70 step volume
control
99 step volume control
2. Choose volume memory:
Step A: Push on the "Debug" switch.
Step B: Turn the selector knob; let the display show as
below pix.
Step C: Turn the volume knob; choose display "ON" or "OF" on
left.
Step D: Push off the "Debug" switch.
Volume memory active.
Volume memory off.
|
¡@ |
