Please note:
For avoid the sound quality degrade, the unit has not built the output
delay design.
After power on the unit, the
display will blinking around 30 second, we are recommend power on the
power amp after the display stop blink .
About the XLR output :
For more fun to the user of full balanced system,
face to the front plate, the Left side XLR output sockets have the full
balanced output , the right side XLR output sockets only have the hot
signal output (mean single ended), user can through the XLR cable to
experience the different sound flavor between full balanced and single
ended.
![](HE1V2.JPG)
Auto dim the display:
While the unit selected input 5 and the volume on 0 step, turn the
volume knob lower 1 step, the left
second display show "1" mean the auto dark active, the display will dark
after you stop operate all buttons .
If you want disable the
function, While the unit selected input 5 and the volume on 0 step, turn
the volume knob lower 1 step to let the
left second display show 0 .
Display inform:
Leftmost on top mean the
input channel number .
Left 2nd and 3rd on top mean the volume level, from 0 to 99, 99
is the max volume .
Left 1st ,2nd and 3rd on bottom mean the
input channel name, it may change either BAL (balance) and SIN
(Single-ended).
Rightmost on bottom mean the
display auto dark, L mean light always, D mean dim .
![](HE1V8.JPG)
|