@

Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese
@


Master-10
(2021 Edition)

Real Balanced ACSS Non Negative Feedback Integrated Power Amp
Applied "Linear Fidelity" Technology
Soft Start Power Design
Can custom order built in DC blocker

 

       
Please note: The product improve cause the inside or outside change without inform .
@
Summarize Use Manual Specs Shipping Cost

The unit applied input short design but can disable:
         The unit  had design the analog idle input short circuit for avoid the disturb between different sources.
         This design also applied in a lot high end
brand devices.
         The working theory : 
Without the idle input short circuit ,if the input 5 and input 4 had connect two extra DACs,  while users select the either input 5 and input 4 , the another input signal will fire through the circuits and mix  into the using signal, even though this signal is  weak  but still can degrade on the sound quality.
          With the idle input short circuit function : if user select either the input 5 and input 4, the another input signal will short circuit then no any signal fire through circuits , can keep the sound quality had not degrade.

         Below case users don't want the idle input short circuit function, users can open the chassis, pull off the jumpers of the proper input channels, please note must pull off of left and right channels together :
        1, The same extra source not only connect the
unit analog input, but connect with other amps simultaneity.
        2, The same extra source connect to the
unit different inputs  at simultaneity.


The auto dark setting:
         The unit can set the auto dark feature by user.
         The 2nd display show the state of the auto dark feature.
         When it display "1", mean the auto dark feature active, the unit auto dark after stop operate on it, only left a little LED to display the unit is power on .
         When it display "0" , mean the auto dark feature discontinued, the unit will light on the display always after power on it.
         To change the feature, user can turn the unit to In 3 channel, turn the volume to "0", then push the volume down button one time to active or discontinued the auto dark feature.
@

@


@

               备ק号: 粤ICP备05020367号

@              权Ҧ: ͧӭ响

Copyright(C) 2004 www.audio-gd.com All Rights Reserved
@