¡@

Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese



Since 15th May, the Master 11 Singularity had update the firmware to include the NOS 11 firmware in one unit.

Users can select the unit working as NOS 11 model or original  Master 11 Singularity model  .

¡@

Master 11 (Singularity)

(The
PCM1704UK stock in an emergency,
Global
200 units limit
)
Discrete  DAC + Headphone amplifier / Preamplifier
Combine from the Singularity 11 + Master 9

User setting between NOS,2x,4x and 8x Oversampling

Built in
4 PCs top grade R-2R  PCM1704UK
32bit / 384K Amanero combo384 with USB isolator
Supports up to 384KHz /32Bit at USB & IIS
Supports up to 192KHz
/24Bit at SPDIF

OCC wires & TCXOs applied
Building with top grade parts & workmanship

 

       

          
    
Since 1st Jan. 2018, Master 11 Singularity had upgrade to with HDMI + RJ45 for IIS inputs.
Summarize Use Manual Specs Custom Option Shipping Cost

Please note:
        The product even had burn in over 300 hours before shipping, but based on the other users feedback, it need least another 150 hours burn in for get the steady state, and the best state will be after 1000 hours burn in , it mean another 700 hours burn in .
        The product had easy and simply operate so the Use Manual only post on this page, without other version . For best apply the built in functions, please discuss in forum .
         The product had the most neutral sound quality, may can't had the best suite all users personal favorite or original audio systems but users can try to change the inside setting for get other sound flavors, and search the best match .
        There are some spare parts and short jumpers shipping with the unit in the package, please keep them well for future use if necessary.

        The product had the pure class A design, we are not recommend stack other products on its top directly, it need least 3CM room on its top side. Also we are not recommend stack it on the top of other hot products , it should place on the shelf .
        Please power of before connect or disconnect the inputs and outputs .
        Power on the product must had more than the half minute after last power off .
        If user want to open the unit and change the inside setting, must confirm the product is working perfect .
        For the electric safe, user must pull off the AC power cable before open the product .
        Even the product had open the top cover, if it had issue in future but not cause by user and the all boards, parts and wires had not modify and take off, its warranty still hold on.


Functions :
HP/PRE : For select the unit output from headphone sockets or the XLR / RCA sockets.
Selector : For select the unit input channels.
Volume: For change the volume of the unit.
DAC/PRE button: For select the unit as DAC output With volume control or Fixed level , without volume control output from the XLR / RCA sockets on rear .

¡@

The display auto dark : 
       
Push into the jumper for auto dark .The display will dark after user stop operate the buttons on front plate .
        Please operate while the unit had power off .
        For safe, user must pull off the AC power cable before take off the top cover.
        After setting the display auto dark, while the display auto dark, there is only one LED light for sign the unit is working.

DSP-1 Jumpers setting(Shipping since 15th. May.)


¡@

Note 1:    ON mean the jumper push on.
              OFF mean the jumper pull off.
              Please power off the unit while change the jumpers for avoid the chip damage by the static electric .
              For safe, user must pull off the AC power cable before take off the top cover.

Master 11 Singularity mode (S2 = OFF)

Jumpers Number

Jumper Setting

Functions describing

BYPASS

Inactive (OFF)

Active (ON)

Note 2

PLLEN

Inactive (OFF)

Active (ON)

PLL setting

DITH

Inactive (OFF)

Active (ON)

Data Dithering

¡@

 8X OS

4X OS

2X OS

NOS

The sound will become smoother and warmer while setting lower oversampling.Default setting in the 8X OS which is the best neutral sound.

IPS0  (OFF)  (ON)  (OFF)  (ON)

IPS1

 (OFF)

 (OFF)

 (ON)

 (ON)

S1

Reserved

ATT0

Reserved

ATT1

Reserved

NOS 11  mode (S2 = ON)

Jumpers Number

Jumper Setting

Functions describing

BYPASS

Inactive (OFF)

Active (ON)

Note 2

PLLEN

Inactive (OFF)

Active (ON)

PLL setting

DITH

Inactive (OFF)

Active (ON)

Data Dithering

IPS0

Reserved

IPS1

Reserved

S1

Reserved

¡@ Mode 1 Mode 2 Mode 3 Mode 3 ¡@

ATT0

 (ON)

 (OFF)  (ON)  (OFF)

ATT1

 (ON)

 (ON)  (OFF)  (OFF)

DSP-1 Jumpers setting(Shipping before 15th. May.)


¡@

Note 1:    ON mean the jumper push on.
              OFF mean the jumper pull off.
              Please power off the unit while change the jumpers for avoid the chip damage by the static electric .
              For safe, user must pull off the AC power cable before take off the top cover.

Jumpers Number

Setting

Functions describing

BYPASS

Inactive (OFF)

Active (ON)

Note 2

PLLEN

Inactive (OFF)

Active (ON)

PLL setting

DITH

Inactive (OFF)

Active (ON)

Data Dithering

¡@

 8X Oversampling

4X Oversampling

2X Oversampling

NOS

Note 2

IPS0

 (OFF)

 (ON)

 (OFF)

 (ON)

IPS1

 (OFF)

 (OFF)

 (ON)

 (ON)

ATT0/ATT1

¡@

¡@

¡@

¡@

Reserved



Note 2:     For the HDMI or IIS input, if the sources or transmit cause the signal had not enough good, the sound had noise or distortion, push into the jumper for fixed the issue.(While USB and SPDIF inputs,this had not function )(If the source signal not good, may can not support up to 384KHz)


IIS definitions¡G

         Customer can send the different definitions to us for custom order the different definition of the I2S (RJ45 and HDMI ) ,we can promise the product can follow customer's request  but we can't promise the unit can working well with customer's device . If the devices can't working , it maybe had the reason as follow :
1, The I2S cable had bad connect.
2, The I2S cable had wrong wire connect inside.
3, The customer send the wrong definition to us.

Please note: Don't hot push / pull of the I2S cable. Any time must power off the units then push or pull the I2S cable.

¡@

RJ45 definitions :
Pin 1 :          SDATA
Pin 3 :          LRCK
Pin 5 :          SCLK
Pin 7 :          MCLK
Pin 2,4,6,8 ¡GGND

HDMI definitions :
Pin 1 :        SDATA -                     
Pin 2 :        GND                         
Pin 3 :       SDATA +                    
Pin 4 :       SCLK +                       
Pin 5 :       GND                         
Pin 6 :       SCLK -
Pin 7 :       LRCK -                        
Pin 8 :       GND                         
Pin 9 :       LRCK +
Pin 10:      MCLK +                     
Pin 11:      GND                         
Pin 12:      MCLK -
Pin 13:      NC                            
Pin 14:      NC                           
Pin 15:      NC
Pin 16:      NC                            
Pin 17:      GND                         
Pin 18:      NC
Pin 19:      Auto on control  ¡]Without function in this product.¡^


¡@

¡@

备号:粤ICP备05020367号

权┮£V:          庆华  ©Mв响

Copyright(C) 2004   www.audio-gd.com    All Rights Reserved