Custom order options:
1,
Upgrade to the Amanero combo384 USB module
and H mode:
Price +USD50, the upgrade functions
as below :
A, Upgrade to the Amanero combo384 USB module for
replace the USB32, ( Choice this upgrade option,
customer don't want upgrade the TCXO for the USB ).
B, After upgrade, The IN 4 except had the RCA coaxial
input but addition one BNC coaxial input .
C, The output voltage level can select between 2.5V
+2.5V (XLR) and 1.25V +1.25V (XLR), which suits different amps .
D, Built in a jumper for customer select if want to
dark the display at around 8 seconds after stop operate the unit .
E, Built in mulriple jumpers for customer select the
digital filter mode between Fast / Slow roll off ( Available of PCM
signal input ) , and the DSD filer roll off between 50KHz / 60KHz /
70KHz, and the digital filter select between NOS /
Oversampling (Available of PCM signal input from USB or I2S ).
2, Custom order BNC input :
The RCA coaxial input sockets can replace by BNC
sockets , cost is USD10/per without shipping delay .
3, Custom order two pair RCA outputs:
If customers don't want ACSS output ,
replace by RCA output free and without shipping delay .
4, Upgrade TCXO for USB chip and ES9018.
There are two TCXO can for upgrade, Cost is USD20 / per without shipping delay .The
upgrade had slightly improved the sound transparency of the USB
input .
5,
Upgrade to the Amanero combo384 USB module:
Upgrade to the Amanero combo384 USB module
for replace the USB32, price +USD45 ( Choice this upgrade option,
customer don't want upgrade the TCXO for the USB ).
6, Custom order the display dark at around
7 seconds after operated.
+USD1,without shipping delay.
|