|
Please note:
This product applies the latest power technology.
Therefore the working temperature has dropped significantly compared
to the previous generation products. This allows leaving power on
over the long term.
This product is burned-in for at
least 100 hours before shipping.
We recommend burning it
for an additional 300 hours for best results.
The quickest way to complete the
burn-in of this product is to play music continuously.
Normal working
state display:

Digit on top:
Input signal
sampling rate indicator; 44.1, 48.0,88.2, 96.0, 176, 192, 352 and
384 are for the PCM formats, while 064, 128, 256 and 512 are for the DSD
formats.
Leftmost digit on bottom:
Input channel
indicator.
"1",for the
USB digital input. (For Windows , the computer must install the
driver for recognize the device. Mac, Linux, IOS and Android don't need driver install.)
"2", for the HDMI-IIS digital input; (The HDMI-IIS
need the source HDMI-IIS output has the same pin definitions for
compatible and work. It can't work with the TV or computer standard
HDMI output .)
"3", for the coaxial digital
input;
2nd on bottom:
Oversampling
display, could be set to NOS modes, also the OS
modes include O2,O4 and O8 .
n : NOS mode.
2 : 2X oversampling
4 : 4X oversampling
8 : 8X oversampling
3rd
digit on bottom:
The turnable sound flavor
simulate .
S (Simulate) : Activate
the phono simulation feature, and we recommend to set the DAC on
OS2, NOS0 or NOS1 mode for best results.
d (Disable-Simulate) :
Disable the phono simulation.
Button
functions:
Setting button: (Only
available while user want to change the set feature .)
Push the Setting button
once, the leftmost digit of bottom will blink, which indicates it is selected.
This allows changing the corresponding setting. Push the Selector button to select the desired value. While the display is
still blinking, push Setting button again , the next digit to the right
will be selected and blink.
While the rightmost digit of
bottom is
blinking, push the Setting button one time, push
the Setting button one time, quite the set menu and back to the normal
state.
Selector button: (Mulriple functions.)
While the display is in normal
state (not blinking), it allows selecting the input source in
decreasing order.

Setting
state display:

Digit on top:
When push the
setting button,the digit on top show the product inside temperature
of celsius .
The leftmost digit on bottom: OS and NOS mode select.
While working under
oversampling (OS) mode, the lower the oversampling level is, the
warmer the sound will be. While working under non-oversampling (NOS)
mode , the sound even more warmer and smoother. The possible values are:
N0 : NOS mode.
O2 : 2X oversampling
O4 : 4X oversampling
O8 : 8X oversampling
The 2nd digit from the left on
bottom:Simulates the sound of a turnable
S (Simulate)
: Activate the phono simulation feature, and we recommend to set the DAC on
OS2 or NOS mode for best results.
d (Disable-Simulate) :
Disable the phono simulation.
The 3rd digit
on bottom: Display auto-dimming
setting
A (Auto Dark) : Enables the display's
auto-dimming; the display will dim 10 seconds after the buttons are
left untouched, only keeping a LED bar lit to indicate the unit is
turned on. As soon as a button is touched, the display will turn
back on.
b (Bright) : Disables the
display's auto-dimming, the display will remain on at all time.

HDMI definitions : (Apply
HDMI transmit the IIS signal, the pin's definitions must exact same )

|