睿志音响

	Wisdom in mind, enthusiasm at heart.

Since 15th May, the Singularity 19 had update the firmware to include the NOS 19 firmware in one unit.

Users can select the unit working as NOS 19 model or original Singularity 19 model .

Singularity 19

Dedicated Discrete R2R DAC
User setting between NOS,2x,4x and 8x Oversampling
Built in 4 PCs 3072KHz support R-2R DA M1 modules
32bit / 384K Amanero combo384
Supports up to 384KHz /32Bit at USB
Supports up to 192KHz /24Bit at SPDIF

Summarize

Use Manual

Specs

Custom Option

Shipping Cost

Please note:
        The product even had burn in over 100 hours before shipping, but based on the other users feedback, it need least another 350 hours burn in for get the steady state.
        The product had easy and simply operate so the Use Manual only post on this page, without other version . For best apply the built in functions, please discuss in forum .
         The product had the most neutral sound quality, may can't had the best suite all users personal favorite or original audio systems but users can try to change the inside setting for get other sound flavors, and search the best match .
        There are some spare parts and short jumpers shipping with the unit in the package, please keep them well for future use if necessary.
        Please power off before connect or disconnect the inputs and outputs .
        If user want to open the unit and change the inside setting, must confirm the product is working perfect .
        For the electric safe, user must pull off the AC power cable before open the product .
        Even the product had open the top cover, if it had issue in future but not cause by user and the all boards, parts and wires had not modify and take off, its warranty still hold on.

About the "setting" button:
        For the HDMI or IIS input, if the sources or transmit cause the signal had not enough good, the sound had noise or distortion, push into the button for fixed the issue.(While USB and SPDIF inputs,this had not function )
　

DSP-1 Jumpers setting(Shipping Since 15th. May.)

　

Note 1:    ON 表示安装上短路插件。
              OFF 表示拨去短路插件。
              用户修改机器内部设置时须注意用电安全，必须但不限于拨去电源线方可开启顶盖。
              请于关机状态下进行切换，以避如果人体有静电时损坏芯片与机器。

Singularity 19 mode (BYPASS = OFF)
Jumpers Number	Jumper Setting				Functions describing
DITH	Reserved
PLLEN	Inactive (OFF)		Active (ON)		PLL setting
	8X OS	4X OS	2X OS	NOS	The sound will become smoother and warmer while setting lower oversampling.
IPS0	(OFF)	(ON)	(OFF)	(ON)
IPS1	(OFF)	(OFF)	(ON)	(ON)
ATT0	Reserved
ATT1	Reserved

NOS 19 mode (BYPASS = ON)
Jumpers Number	Jumper Setting				Functions describing
DITH	Inactive (OFF)		Active (ON)		Note 2
PLLEN	Reserved
DITH	Reserved
IPS0	Reserved
IPS1	Reserved
	Mode 1	Mode 2	Mode 3	Mode 3
ATT0	(ON)	(OFF)	(ON)	(OFF)
ATT1	(ON)	(ON)	(OFF)	(OFF)

DSP-1 Jumpers setting(Shipping Before 15th. May.)

　

Jumpers Number	Setting				Functions describing

PLLEN	Inactive (OFF)		Active (ON)		PLL setting
DITH	Inactive (OFF)		Active (ON)		Data Dithering
	8X Oversampling	4X Oversampling	2X Oversampling	NOS	The sound will become smoother and warmer while setting lower oversampling.
IPS0	(OFF)	(ON)	(OFF)	(ON)
IPS1	(OFF)	(OFF)	(ON)	(ON)
ATT0/ATT1					Reserved

Note 2: For the HDMI or IIS input, if the sources or transmit cause the signal had not enough good, the sound had noise or distortion, push into the jumper for fixed the issue.(While USB and SPDIF inputs,this had not function )(If the source signal not good, may can not support up to 384KHz)

RJ45 definitions :
Pin 1 :          SDATA
Pin 3 :          LRCK
Pin 5 :          SCLK
Pin 7 :          MCLK
Pin 2,4,6,8 ：GND

HDMI definitions :
Pin 1 :        SDATA -
Pin 2 :        GND
Pin 3 :       SDATA +
Pin 4 :       SCLK +
Pin 5 :       GND
Pin 6 :       SCLK -
Pin 7 :       LRCK -
Pin 8 :       GND
Pin 9 :       LRCK +
Pin 10:      MCLK +
Pin 11:      GND
Pin 12:      MCLK -
Pin 13:      NC
Pin 14:      NC
Pin 15:      NC
Pin 16:      NC
Pin 17:      GND
Pin 18:      NC
Pin 19:      Auto on control （Without function in this product.）