睿志音响

	Wisdom in mind, enthusiasm at heart.

DI-V3
USB / Coaxial / I2S converter

Full / High Speed Asynchronous Transfer Mode
Built in USB-32 perform ultra low jitter unnecessary DSP processor
Coaxial output up to 24bit / 192KHz support
I2S output up to 32 bit / 384K support

Promo Price: DI-V3 USD175 ( USB & coaxial inputs)

DI-PSU for DI-V3

Summarize

Use Manual

Specs

Technology Detail

Custom Option

Shipping Cost

Please note :
1,   Start the Windows then power on the DI.
2,   In power supply by computer model, make sure the USB cable connect well with the USB port .
3, If use extern power supply for the DI, Exchange the power supply of DI, please push the switch of DI to "OFF" , after waiting least 5 seconds then push to another power supply .

Exchange the output sockets based on users request:
          In default the BNC output applied Current Conveyor Technology , the RCA output applied transmit insulate technology, If user want to applied applied Current Conveyor technology through RCA output , or applied transmit insulate technology through BNC output, just exchange the wires connect in the DI without soldering. While exchange the wires must be care don't break the wires .

For the old version PSU modify to power supply new DI-V3
DI-V1 version PSU : Addition one 10 ohm / 0.5W resistor as below photo .
DI-V2 version PSU : Take off the top two resistors and solder one 10 hom / 0.5W as below photo .

　