睿志音响

R-1 (2021 Version)

8 group fully discrete R-2R DA modules to combine into real balanced push/pull decoders.

4 group fully discrete real balanced DSD native decoders.

Fully discrete real balanced current transmition design.

2 pc ultra high frequency 90/98 MHz Accusilicon 318B femtosecond clocks provide synchronous clock for whole unit without PLL up-frequency .

32bit / PCM384K /DSD512 asynchronous transfer Amanero 384 apply the FPGA synchronous clock.

The whole digital circuit built with 1 pc FPGA and 5 pc CPLD programmable chipsets to separate the different configured circuits for avoid interrupt, data process in parallel mode.

Support firmware update to improve on sound quality.

All digital process mode settings accessible by buttons on front (No need to open the chassis).
Firmware update port accessible on rear (Update firmware no need to open the chassis).
　

Specifications tested by OS8 mode and already through sound tuned, we always improve for better real like , musical and analog sound ,improvement may result in changes in specifications and design without notice.
S/N Ratio	>110DB
Output impedance	<10 ohm (RCA/ XLR)
Output Level	2.5V (RCA) 5V （XLR） 2MA+2MA (ACSS)
Frequency Response	20Hz - 20KHz (< - 0.5DB)
THD+N	<0.01%
Input Sensitivity	0.5 Vp-p ( 75 Ohms, Coaxial ) 19 dBm (Optical) USB1.0 - USB3.0
Support Operate Systems (USB)	Windows, OSX, Linux, ISO
Support Sampling	USB & IIS : 44.1kHz - 384kHz /32Bit DSD64-512 Coaxial mode: 44.1kHz - 192kHz Optical mode: 44.1kHz - 96kHz
Power Requirement	Version 1: 100-120V AC 50/60 Hz Version 2: 220-240V AC 50/60 Hz
Power Consumption	19W
Package Weight	Approximately 5KG
Dimensions	W240 X L360 X H80 (MM, Fully aluminium )
Accessories	AC power cord X1 USB cable X1

	Wisdom in mind, enthusiasm at heart.